Printing tags can be accomplished a variety of ways within the HME360 Application but fundamentally all printing functions are resolved from the Tags menu selection. From here, user selects Inventory Tags>Supplier/Location The user should be in the screen entitled: Tag Type > Suppliers >Vendors If the user has already created a print tag file (see […]
Category: Printing Tags
Tag Layout Configuration
Prior to printing any RFID or other tags, a tag layout configuration must be configured. Typically this is done during setup but users may need to reconfigure tags due to additional warehouses coming online, new printers being added to the enterprise or for various other reasons. Tag Layout can be accessed via the Configuration Cog […]
RFID Printer Manual Calibration Zebra RZ/ZM 400-600
Before printing labels, replacing printer ribbon or after moving a printer between PC’s you must calibrate the printer. Please follow the steps in the below video. NOTE: If you are getting a high number of ‘VOID’ tags please also recalibrate your printer.
RFID Printer Label Load Zebra RZ/ZM 400-600
NOTE: When changing labels, moving a printer between PC’s or when changing ribbon you must calibrate the printer before printing your labels. See this page for manual configuration steps. The below video walks you through the steps to load labels for a Zebra 4″ Commercial Printer
Install Generic ZPL Printer
This article explains how to print a ZPL file using a text editor and the Windows Generic Text Driver Printer. In order to use the HME360 Web app for printing RFID tags with a AZ you must install a generic ZPL printer on the device from which you are printing. To print a file that […]