Update Flow: Cycle Count Made by HME360 Support with Scribe Cycle Count compares what was scanned and what was on-hand in the location (expected). The user will be able to see what was extra (not on hand) and can add those items as on-hand in the location. Items not found on the scan will be […]
Category: Mobile
Mobile Settings
Settings for Mobile Made by HME360 Support with Scribe After downloading the HME360 App from the Google Play Store or Apple App Store, users can log in and adjust settings to enhance their mobile experience as needed for their company’s practices. The user may update their choices at any time. If the app needs to […]
Mobile Filtering
Filtering in Mobile Made by HME360 Support with Scribe Filters applied in mobile during view and update flows will allow the user to filter scanning, viewing, or affecting the types of tags and/or products. Filtering must be applied before scanning. 1. Before scanning, check the filter icon at the bottom of the screen. If it […]
Mobile: Tag Create
Update Flow: Create Tags Made by HME360 Support with Scribe This flow is used to read barcodes and create tags. It acts like add inventory, but will give the user clear information about a tag that has already been printed. Tag files will be created on the website in the “Tags” section, located on the […]
Mobile: Inventory View
Using Inventory in View Click to See Guided Walkthrough on Scribe Inventory in the mobile allows the user to view products that are in the selected location. The user can filter products that are or were located in the zone by the statuses Missing, Delay, Intransit, or Suspended. The User can see if a product […]
Locate
Using the Locate Feature in View Made by HME360 Support with Scribe Tag Locate is a feature that will help a user locate tagged equipment. The equipment must be RFID tagged and located within 15-20 ft. Tag locate is accessed by selecting View from the Home Screen and then Locate. Alert: Equipment or Supply MUST […]
Using Locate in Scan Results
Locating Tags in the Scan Detail Screen and Exceptions. Made by HME360 Support with Scribe Tag Locate is a feature that will help a user locate tagged equipment. The equipment must be RFID tagged and located within 15-20 ft. Tag locate is accessed by selecting Update from the Home Screen, then an Inventory Flow like […]
Camera Scanning of Barcodes – Multiple
Camera Barcode Scan – Multiple Made by HME360 Support with Scribe A User can use their mobile device’s camera to scan barcodes in the Inventory Update options. The User can capture and submit multiple Barcodes in one scan, selecting all or choosing which to submit. 1. Tap Update 2. Tap the needed Inventory Option. 3. […]
Scanning a Serial Number that Exists on Multiple Products
Scanning Serial Numbers in the Mobile App that Exist on Multiple Products Made by HME360 Support with Scribe This guide provides the method for choosing the correct product(s) with the same serial number. By following the simple steps outlined, users can choose one or more products with the same serial number to add. 1. Tap […]
Mobile Errors
Serial Number Scan Errors Process: Inventory Count/Add/Adjust and Cycle Count Cause: Loss of Internet Connectivity. Occurs: Received after tapping confirm on scan of a Serial number that has not been added to HME360 previously and ERP (Brightree, Bonafide, etc.) sync is enabled. Solution: Scan Serial Number again, prior to tapping confirm button move to area […]